New products

UT801 Bench Multimeter
The UT801 Benchtop Multimeter is a versatile Digital Multimeter (DMM) that is ideal for various hobbyist applications. With a wide measurement range and many measurement functions, it gives you the ability to measure a variety of electrical quantities.
Easy Operation
The UT801 bench multimeter is very easy to operate thanks to the convenient rotary knob. You can intuitively set the desired measurement range and quickly perform your measurements. The large backlit LCD display gives you a clear and easy-to-read readout of your readings.
Comprehensive Measurement Capabilities
The UT801 bench multimeter allows you to measure DC and AC voltage, DC and AC current,

UT522 Earth Resistance Meter
The UT522 Earth Resistance Meter of the UT520 series is a precise and reliable measuring instrument for earth resistance measurements in power and electrical systems. It is ideal for use in lightning protection and grounding systems of all electrical equipment. The instrument is characterized by its light weight, which makes it particularly practical for use in the field.
Features
The UT522 offers a variety of features to make your job easier. With manual range selection, you can set the measurement range to suit your needs. A low battery indicator warns you in time of an empty battery, so you can end your measurements in time or recharge the battery.
The device has a data

UT196 Solar Multimeter
The UT196 Solar Multimeter is a versatile meter perfect for solar applications such as installing and maintaining a solar system. It has been specifically tested for safe use in CAT III 1000 V and CAT IV 600 V environments to provide you with the highest level of safety.
Precise measurements
The UT196 features a low-pass filter function that allows you to isolate high-frequency noise and make measurements as accurately as possible. It can measure up to 1700 V DC and 1500 V AC voltages and offers a resolution of 6000 counts. In addition, it can make capacitance measurements and has an acoustic continuity tester and a diode test function for efficient fault diagnosis.
Rugged and W

UTi720A - UNI-T's robust and easy-to-use thermal imaging camera
Are you looking for a thermal imaging camera that is robust and easy to use? Then the UTi720A from UNI-T is the perfect choice for you. With its 2.8" TFT screen (320×240 pixels) and an IR resolution of 256×192, it delivers razor-sharp images. The temperature measurement range of -20℃ to 550℃ / -4℉ to 1022 ℉ allows you to detect even the smallest temperature differences. Automatic alarms for high/low temperatures and hot spots/cold spots make your job even easier.
Analyser and image modes
The on-screen 3-dot analyser allows you to measure temperatures quickly and easily. The UTi720A has several image modes, including thermal image, vi

UNI-T UTD2102CL+ - High quality digital oscilloscope with great price-performance ratio
The UNI-T UTD2102CL+ is a powerful 2-channel oscilloscope, which is very suitable for electronics laboratories and schools due to an excellent price-performance ratio . With a bandwidth of 100 MHz and a sampling rate of 500 MSa/s, the UTD2102CL+ delivers accurate measurement results. In addition, the USB interface allows measurement results to be saved.
Functions at a glance
The oscilloscope has many functions such as XY mode, which allows you to measure the phase difference between two signals of the same frequency. With the ZOOM function, you can further analyse the details of the observed waveform.
Furthermore, i

UTD1062C Handheld Oscilloscope - Portable Multifunction Tool for Professionals
Are you looking for a handy but powerful oscilloscope to take on the go? Then the UTD1062C handheld oscilloscope could be just what you need. With its multiple functions, it's the ideal multifunction tool for professionals who spend a lot of time on the road.
Multimeter and oscilloscope in one
The UTD1062C is not only an oscilloscope, but also a multimeter. It combines the advantages of both devices to deliver reliable measurement results in a wide range of applications. The 2-channel technology enables fast and precise measurements with a bandwidth of up to 60MHz. At the same time, the UTD1062C operates at a sampling rate of up to 250 Msa/s,

UT213C Digital True RMS clamp meter Description
The UT213C is a digital True RMS clamp meter with a wide range of functions. It is ideal for measuring AC/DC voltage, 400A AC/DC current, resistance, capacitance, frequency and also temperature thanks to the included temperature probe. The backlit LCD display with 4000 counts and automatic range selection accurately displays readings. The 30mm clamp opening makes it easy to clamp to large conductors, and the NCV function displays voltages without direct contact. The built-in flashlight allows convenient work in places with poor lighting conditions. Additional helpful features include a data storage function with a MAX/MIN mode, an auto power off function, and a low battery indicator. 

UPO2202 Oscilloscope Description
The UPO2202 is a professional digital oscilloscope with the innovative Ultra Phosphor technology of UNI-T's UPO2000 series. It offers 2 channels at a maximum sampling rate of 2 GSa/s to a 200 MHz bandwidth. The memory depth is 56Mpts, which allows longer signal recordings without losing the waveform. The smallest adjustable vertical measurement range is 1mV/div, which in combination with the very fast signal acquisition rate of 1,000,000 wfms/s and the high sensitivity of the device allows to observe even the smallest jitter and glitches. The 8-inch capacitive TFT LCD display shows the measurements in a resolution of 800 x 480 pixels. With the touch function, the Oscilloscope can be controlled very comfortably using gestures. T

UPO2102 Oscilloscope Description
The UPO2102 is a professional digital oscilloscope with the innovative Ultra Phosphor technology of UNI-T's UPO2000 series. It offers 2 channels at a maximum sampling rate of 2 GSa/s to a 100 MHz bandwidth. The memory depth is 56Mpts, which allows longer signal recordings without losing the waveform. The smallest adjustable vertical measurement range is 1mV/div, which in combination with the very fast signal acquisition rate of 1,000,000 wfms/s and the high sensitivity of the device allows to observe even the smallest jitter and glitches. The 8-inch capacitive TFT LCD display shows the measurements in a resolution of 800 x 480 pixels. With the touch function, the Oscilloscope can be controlled very comfortably using gestures. T

UPO1202CS Oscilloscope Description
The UPO1202CS is a digital oscilloscope with the innovative Ultra Phosphor technology of UNI-T's UPO1000CS series. It offers 2 channels at a maximum sampling rate of 1 GSa/s to a 200 MHz bandwidth. The memory depth is 56Mpts, which allows longer signal recordings without losing the waveform. The smallest adjustable vertical measurement range is 1mV/div, which in conjunction with the fast signal acquisition rate of 500,000 wfms/s and the high sensitivity of the device allows jitter and glitches to be observed. The 8-inch TFT LCD display shows measurements in 800 x 480 pixel resolution. The device offers a LAN port for remote control via a network with support via web access, as well as two USB ports as interface for connection

UTi721M Thermal Imaging Camera Description
The UTi72M is the latest portable infrared thermal imaging camera for Android smartphones from the well-known quality manufacturer Uni-Trend with a resolution of 256 x 192. Thanks to its compact design, the camera is perfect for mobile use. With the help of the USB Type-C connector, it can be connected directly to your Android smartphone, which allows you to immediately view recordings on the display with a special app.  Additionally, snapshots as well as videos can be recorded. It offers a display palette of 7 colors and 2 deployment modes: Industrial and EST (Elevated Skin Temperature).
All in all, the UTi721M thermal imaging camera is a powerful device in a compact, sturdy housing, which

UPO1102CS Oscilloscope Description
The UPO1102CS is a digital oscilloscope with the innovative Ultra Phosphor technology of UNI-T's UPO1000CS series. It offers 2 channels at a maximum sampling rate of 1 GSa/s to a 100 MHz bandwidth. The memory depth is 56Mpts, which allows longer signal recordings without losing the waveform. The smallest adjustable vertical measurement range is 1mV/div, which in conjunction with the fast signal acquisition rate of 500,000 wfms/s and the high sensitivity of the device allows jitter and glitches to be observed. The 8-inch TFT LCD display shows measurements in 800 x 480 pixel resolution. The device offers a LAN port for remote control via a network with support via web access, as well as two USB ports as interface for connection