Home

MEAN WELL MDR-20 DIN Rail Power Supply Series DescriptionThe MDR-20 Series of DIN Rail Power Supplies from renown manufacturer MEAN WELL are the perfect solution for your power needs. They are directly DIN rail mountable and feature a closed design with touch-protected screw terminals for increased safety. They have universal input and are protected against short circuit and overvoltage. The power supplies are equipped with a LED indicator that shows if the power is on and the device is working. Due to its low no-load power, the MDR-20 series is highly efficient. MEAN WELL MDR-20 DIN Rail Power Supply Series Featuresdirect DIN rail mountableclosed desi

MEAN WELL RCP-2000 Rack Power Supply Series Features:closed design (case) with fan universal input overload protection by current limiting, auto recovery protected against short circuit, overload, overvoltage built-in PFC circuit low height parallel function active current distribution up to 6000W (3 power supplies) switching on and off of output voltage via remote signal
sensor connection for correct voltage at the load AC-OK& DC-OK signal 

Meanwell LRS-35 Enclosed Power Supply Series Description:The LRS-35 series consists of 35W single output power supplies with an enclosed design and a 30mm low profile design. The entire series operates with an input voltage range of 85-264VAC and offers various output voltages (5V, 12V, 15V, 24V, 36V and 48V). In addition to the high efficiency of up to 89%, the metal grid package design improves the heat dissipation of the LRS-35 series, allowing the entire series to operate from -30°C to 70°C under air convection without a fan. The ultra-low idle power consumption (less than 0.2W) allows the final system to easily meet worldwide power requirements. The LRS-35 series has extensive protection features and a 5G anti-vibration function. Consequently, the serie

DC5-80V ESP8266 WiFi 1-way relay module ESP-12F development board secondary development

Main Product FeaturesUltra-bright 30 W LED chip producing up to 1250 lumens with 4 versatile modes (High, Middle, Low, Strobe).Continuous 4× optical zoom mechanism: rotate the lamp head smoothly from broad floodlight to a focused spotlight.High-capacity 4000 mAh 21700 lithium battery included, delivering up to 12 hours of runtime and a solid 2.5 hours on High mode.Integrated USB-C fast charging (5 V / 2 A) with dual-colour battery status and charging indicator.Rugged aircraft-grade aluminium body with anti-slip knurling and IPX6 water resistance against heavy rain and workshop debris.Intelligent single tail-switch interface featuring an automatic mode memory function.Supplied with a sturdy pocket clip, lanyard eyelet, replaceable 21700 cel

Main Product FeaturesVersatile TDR Cable Testing: Reliably tests twisted-pair network cabling including CAT5, CAT6, UTP, FTP, and SSTP.Exclusive 8-Core Crimping Test: Fast 1-to-1 wire mapping and crimp verification in 1 second or less with a 10 cm minimum detectable length.Precise Length & Fault Distance: Measures open-circuit cable lengths from 2.5 m to 300 m and pinpoints short-circuit fault locations.Comprehensive PoE Diagnostics: Evaluates Power over Ethernet across DC 5 V to 60 V supporting IEEE 802.3af, 802.3at, and 802.3bt standards.Ethernet Port & Switch Detection: Identifies port link status, 10M/100M/1000M speeds, auto-negotiation, and full/half-duplex modes.Digital Anti-Interference Wire Tracing: Highly accurate 125 kHz modulated

Main Produkt-FeaturesWide Measuring Range: Captures temperatures from -40°C to +85°C and relative humidity from 0% to 100%.High Accuracy: Precise measurements with an accuracy of ±0.3°C for temperature and ±2.5% RH for humidity.Bluetooth & App Connectivity: Convenient data transfer and analysis via the 'TempLink' mobile app for Android and iOS.PC Analysis Software: Allows for comprehensive evaluation and report generation on a computer.Audible & Visual Alarm: Programmable alarms warn you immediately if defined thresholds are exceeded or fallen below.Large Data Storage: Stores up to 64,000 measurement data sets for complete long-term recording.Robust Design: IP54 protection rating makes the logger dust and splash-proof.Flexible Mounting

ZD-106 Desoldering Pump Description
The ZD-106 desoldering pump is a high quality, reliable tool that is perfect for anyone who wants to remove soldered components from circuit boards. This pump has a powerful suction system that can remove even stubborn solder. Thanks to its compact design, it takes up little space on your workbench and the durable Teflon nozzle ensures years of trouble-free use.
 
The ZD-106 complies with all EU safety standards.
 
ZD-106 Desoldering Pump Features

High suction power
Compact design 
Strong spring
Durable Teflon nozzle 
Simple operation

Fan 12V 92x38 B 156m_/h 50,3dBA

Thermal paste Copper 14 ml - High quality product from AG TermoPasty

PKI 10 A gelb/grün-yellow/green (930103188)
Pole terminal with claw edge and captive insulated head and insulated ring. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For insulated, non-rotating installation in equipment chassis and switchpanels with a wall thickness up to 2 mm.
 




Technical data