Home
- Lc Technology modules
- Lead-acid batteryaddremove
- Chimical aid
- Medical Equipment Patient Monitoring SpO2 Sensors
- Medical Equipment Patient Monitoring ECG Cables
- Medical Equipment Patient Monitoring EKG Cables
- Medical Equipment Patient Monitoring NIBP Cuffs
- Medical Equipment Patient Monitoring IBP Cables
- Medical Equipment Patient Monitoring Temperature Probes
- Medical Equipment New Products
- Active Componentsaddremove
- Measurementaddremove
- Power Supplyaddremove
- Capacitorsaddremove
- Uncategorized
- Solderingaddremove
- Workshopaddremove
- Remote Controlsaddremove
- Fanaddremove
- Residual Current / Circuit Breakeraddremove
- Remote Controls for Seniors & Hotel Remote Controls
- Programmable Remote Controls
Trending
SKS Hirschmann
There are 148 products.
AGS 20
AGS 20 (603006001)
Nickel-plated steel alligator clip. Clamping range up to a maximum bolt diameter 5 mm. 4 mm diameter socket connection, connection possible by terminal screw and solder connection.
Technical data
connection
unsprung socket 4
Nickel-plated steel alligator clip. Clamping range up to a maximum bolt diameter 5 mm. 4 mm diameter socket connection, connection possible by terminal screw and solder connection.
Technical data
connection
unsprung socket 4
€0.54 vat included 21%
€0.45 without vat
VON 20 gruen / green
VON 20 gruen / green (930046104)
Fully mating connector ,shatter-proof, flexible insulated sleeve. The tapering sleeve end also serves as kinking protection for the lead. Screw connection up to maximum cable cross-section of 1.5 mm². Nickel-plated brass contact material.
Technical data
connection
Fully mating connector ,shatter-proof, flexible insulated sleeve. The tapering sleeve end also serves as kinking protection for the lead. Screw connection up to maximum cable cross-section of 1.5 mm². Nickel-plated brass contact material.
Technical data
connection
€0.64 vat included 21%
€0.53 without vat
VON 30 rot / red
VON 30 rot / red (930047101)
Fully mating connector, shatter-proof, flexible insulated sleeve. The tapering sleeve end also serves as kinking protection for the lead. Solder connection up to maximum cable cross-section of 2.5 mm². Nickel-plated brass contact material.
Technical data
connection
Fully mating connector, shatter-proof, flexible insulated sleeve. The tapering sleeve end also serves as kinking protection for the lead. Solder connection up to maximum cable cross-section of 2.5 mm². Nickel-plated brass contact material.
Technical data
connection
€0.60 vat included 21%
€0.50 without vat
PK 10 A schwarz / black
PK 10 A schwarz / black (930099100)
Pole terminal with claw edge and captive insulated head. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For installation in equipment chassis and switch panels.
Technical data
connection
Pole terminal with claw edge and captive insulated head. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For installation in equipment chassis and switch panels.
Technical data
connection
€1.78 vat included 21%
€1.47 without vat
PK 10 A rot / red
PK 10 A rot / red (930099101)
Pole terminal with claw edge and captive insulated head. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For installation in equipment chassis and switch panels.
Technical data
connection
Pole terminal with claw edge and captive insulated head. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For installation in equipment chassis and switch panels.
Technical data
connection
€1.78 vat included 21%
€1.47 without vat
PK 10 A gruen / green
PK 10 A gruen / green (930099104)
Pole terminal with claw edge and captive insulated head. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For installation in equipment chassis and switch panels.
Technical data
connection
Pole terminal with claw edge and captive insulated head. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For installation in equipment chassis and switch panels.
Technical data
connection
€1.78 vat included 21%
€1.47 without vat
PK 10 A gelb/grün-yellow/green
PK 10 A gelb/grün-yellow/green (930099188)
Pole terminal with claw edge and captive insulated head. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For installation in equipment chassis and switch panels.
Technical data
connection
Pole terminal with claw edge and captive insulated head. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For installation in equipment chassis and switch panels.
Technical data
connection
€1.96 vat included 21%
€1.62 without vat
PKI 10 A schwarz / black
PKI 10 A schwarz / black (930103100)
Pole terminal with claw edge and captive insulated head and insulated ring. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For insulated, non-rotating installation in equipment chassis and switchpanels with a wall thickness up to 2 mm.
Technical data
Pole terminal with claw edge and captive insulated head and insulated ring. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For insulated, non-rotating installation in equipment chassis and switchpanels with a wall thickness up to 2 mm.
Technical data
€2.10 vat included 21%
€1.74 without vat
PKI 10 A gruen / green
PKI 10 A gruen / green (930103104)
Pole terminal with claw edge and captive insulated head and insulated ring. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For insulated, non-rotating installation in equipment chassis and switchpanels with a wall thickness up to 2 mm.
Technical data
Pole terminal with claw edge and captive insulated head and insulated ring. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For insulated, non-rotating installation in equipment chassis and switchpanels with a wall thickness up to 2 mm.
Technical data
€2.10 vat included 21%
€1.74 without vat
PKI 10 A weiß / white
PKI 10 A weiß / white (930103107)
Pole terminal with claw edge and captive insulated head and insulated ring. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For insulated, non-rotating installation in equipment chassis and switchpanels with a wall thickness up to 2 mm.
Technical data
Pole terminal with claw edge and captive insulated head and insulated ring. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For insulated, non-rotating installation in equipment chassis and switchpanels with a wall thickness up to 2 mm.
Technical data
€2.12 vat included 21%
€1.75 without vat
PKI 10 A gelb/grün-yellow/green
PKI 10 A gelb/grün-yellow/green (930103188)
Pole terminal with claw edge and captive insulated head and insulated ring. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For insulated, non-rotating installation in equipment chassis and switchpanels with a wall thickness up to 2 mm.
Technical data
Pole terminal with claw edge and captive insulated head and insulated ring. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For insulated, non-rotating installation in equipment chassis and switchpanels with a wall thickness up to 2 mm.
Technical data
€2.40 vat included 21%
€1.98 without vat
PKI 10 A rot / red Au
PKI 10 A rot / red Au (930103701)
Pole terminal with claw edge and captive insulated head and insulated ring. 4 mm diameter gold -plated brass threaded bolt with 2 mm diameter transverse hole. For insulated, non-rotating installation in equipment chassis and switchpanels with a wall thickness.
Technical data
Pole terminal with claw edge and captive insulated head and insulated ring. 4 mm diameter gold -plated brass threaded bolt with 2 mm diameter transverse hole. For insulated, non-rotating installation in equipment chassis and switchpanels with a wall thickness.
Technical data
€3.63 vat included 21%
€3.00 without vat