Home
- Lc Technology modules
- Lead-acid batteryaddremove
- Chimical aid
- Medical Equipment Patient Monitoring SpO2 Sensors
- Medical Equipment Patient Monitoring ECG Cables
- Medical Equipment Patient Monitoring EKG Cables
- Medical Equipment Patient Monitoring NIBP Cuffs
- Medical Equipment Patient Monitoring IBP Cables
- Medical Equipment Patient Monitoring Temperature Probes
- Medical Equipment New Products
- Active Componentsaddremove
- Measurementaddremove
- Power Supplyaddremove
- Capacitorsaddremove
- Uncategorized
- Solderingaddremove
- Workshopaddremove
- Remote Controlsaddremove
- Fanaddremove
- Residual Current / Circuit Breakeraddremove
SKS Hirschmann
There are 92 products.
AK 10 gelb / yellow
AK 10 gelb / yellow (930126103)
Insulated alligator clip. Clamping range up to 6 mm bolt diameter. Fine wire section for very thin wires. Only the lower part o fthe clip has a tin-plated, brass contact insert. 4 mm diameter socket connection.
Technical data
connection
Insulated alligator clip. Clamping range up to 6 mm bolt diameter. Fine wire section for very thin wires. Only the lower part o fthe clip has a tin-plated, brass contact insert. 4 mm diameter socket connection.
Technical data
connection
€1.23 vat included 21%
€1.02 without vat
AK 10 schwarz / black
AK 10 schwarz / black (930126100)
Insulated alligator clip. Clamping range up to 6 mm bolt diameter. Fine wire section for very thin wires. Only the lower part o fthe clip has a tin-plated, brass contact insert. 4 mm diameter socket connection.
Technical data
connection
Insulated alligator clip. Clamping range up to 6 mm bolt diameter. Fine wire section for very thin wires. Only the lower part o fthe clip has a tin-plated, brass contact insert. 4 mm diameter socket connection.
Technical data
connection
€1.23 vat included 21%
€1.02 without vat
AGF 20
AGF 20 (930120000)
Nickel-plated steel alligator clip. The special shape allows clamping of both extremely fine and thick wires.4 mm diameter socket connection and solder connection possible.max. bolt diameter 10 mm.
Technical data
connection
Nickel-plated steel alligator clip. The special shape allows clamping of both extremely fine and thick wires.4 mm diameter socket connection and solder connection possible.max. bolt diameter 10 mm.
Technical data
connection
€0.59 vat included 21%
€0.49 without vat
PKN 10 B rot / red
PKN 10 B rot / red (930117101)
Pole terminal with claw edge and captive insulated head. 6 mm diameter nickel-plated brass threaded bolt with 2.6 mm diameter transverse hole. For non-rotating installation in equipment chassis and switchpanels.
Technical data
connection
Pole terminal with claw edge and captive insulated head. 6 mm diameter nickel-plated brass threaded bolt with 2.6 mm diameter transverse hole. For non-rotating installation in equipment chassis and switchpanels.
Technical data
connection
€3.37 vat included 21%
€2.79 without vat
PKN 10 B schwarz / black
PKN 10 B schwarz / black (930117100)
Pole terminal with claw edge and captive insulated head. 6 mm diameter nickel-plated brass threaded bolt with 2.6 mm diameter transverse hole. For non-rotating installation in equipment chassis and switchpanels.
Technical data
connection
Pole terminal with claw edge and captive insulated head. 6 mm diameter nickel-plated brass threaded bolt with 2.6 mm diameter transverse hole. For non-rotating installation in equipment chassis and switchpanels.
Technical data
connection
€3.37 vat included 21%
€2.79 without vat
KLEPS 30 rot / red
KLEPS 30 rot / red (930113101)
Clamp-type test probe with rotating grip jaws and flexible shaft. The special form of the grip jaws allows clamping of pins and wires up to a maximum of 4mm diameter. 4mm diameter brass socket connection with side screw, grip jaws additionally tin-plated.
Technical data
connecti
Clamp-type test probe with rotating grip jaws and flexible shaft. The special form of the grip jaws allows clamping of pins and wires up to a maximum of 4mm diameter. 4mm diameter brass socket connection with side screw, grip jaws additionally tin-plated.
Technical data
connecti
€4.01 vat included 21%
€3.31 without vat
KLEPS 30 schwarz / black
KLEPS 30 schwarz / black (930113100)
Clamp-type test probe with rotating grip jaws and flexible shaft. The special form of the grip jaws allows clamping of pins and wires up to a maximum of 4mm diameter. 4mm diameter brass socket connection with side screw, grip jaws additionally tin-plated.
Technical data
co
Clamp-type test probe with rotating grip jaws and flexible shaft. The special form of the grip jaws allows clamping of pins and wires up to a maximum of 4mm diameter. 4mm diameter brass socket connection with side screw, grip jaws additionally tin-plated.
Technical data
co
€4.01 vat included 21%
€3.31 without vat
KD 10 rot / red
KD 10 rot / red (930109101)
Insulated coupling with a tin-plated brass tube for two 4 mm diameter plugs.
Technical data
connection
unsprung socket 4 mm
r
Insulated coupling with a tin-plated brass tube for two 4 mm diameter plugs.
Technical data
connection
unsprung socket 4 mm
r
€0.64 vat included 21%
€0.53 without vat
PKI 10 A rot / red Au
PKI 10 A rot / red Au (930103701)
Pole terminal with claw edge and captive insulated head and insulated ring. 4 mm diameter gold -plated brass threaded bolt with 2 mm diameter transverse hole. For insulated, non-rotating installation in equipment chassis and switchpanels with a wall thickness.
Technical data
Pole terminal with claw edge and captive insulated head and insulated ring. 4 mm diameter gold -plated brass threaded bolt with 2 mm diameter transverse hole. For insulated, non-rotating installation in equipment chassis and switchpanels with a wall thickness.
Technical data
€3.63 vat included 21%
€3.00 without vat
PKI 10 A gelb/grün-yellow/green
Last items in stock
PKI 10 A gelb/grün-yellow/green (930103188)
Pole terminal with claw edge and captive insulated head and insulated ring. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For insulated, non-rotating installation in equipment chassis and switchpanels with a wall thickness up to 2 mm.
Technical data
Pole terminal with claw edge and captive insulated head and insulated ring. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For insulated, non-rotating installation in equipment chassis and switchpanels with a wall thickness up to 2 mm.
Technical data
€2.40 vat included 21%
€1.98 without vat
PKI 10 A weiß / white
PKI 10 A weiß / white (930103107)
Pole terminal with claw edge and captive insulated head and insulated ring. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For insulated, non-rotating installation in equipment chassis and switchpanels with a wall thickness up to 2 mm.
Technical data
Pole terminal with claw edge and captive insulated head and insulated ring. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For insulated, non-rotating installation in equipment chassis and switchpanels with a wall thickness up to 2 mm.
Technical data
€2.12 vat included 21%
€1.75 without vat
PKI 10 A gruen / green
PKI 10 A gruen / green (930103104)
Pole terminal with claw edge and captive insulated head and insulated ring. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For insulated, non-rotating installation in equipment chassis and switchpanels with a wall thickness up to 2 mm.
Technical data
Pole terminal with claw edge and captive insulated head and insulated ring. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For insulated, non-rotating installation in equipment chassis and switchpanels with a wall thickness up to 2 mm.
Technical data
€2.10 vat included 21%
€1.74 without vat