Soldering

18641020 Felder Solder Wire Sn60Pb39Cu1 Description: Standard solder wire for hand soldering in electrical engineering, electromechanics and to a certain extent in electronics. The flux is characterized by high temperature resistance and does not spatter during melting. Optimum wetting as well as spreading values exceeding standards make this solder wire a top product among tubular solders. 18641020 Felder Solder Wire Sn60Pb39Cu1 Features: Series: ISO-Core "RA"Alloy: Sn60Pb39Cu1 Flux content: 2.5% standard Diameter: 1mm 

Zhongdi 79-2910 (TIP B9-1) long life spare tipReplacement soldering tip with a 9.8mm diameter, suitable for the following soldering irons:ZD-701-100W

Zhongdi ZD-418B (88-4182) spare soldering iron:

Spare soldering iron suitable for the following soldering stations:

ZD-8917
ZD-8916
6 pins, with sleep function 

PCW09A Digital Soldering Station Description
The PCW09A is a high quality and reliable digital soldering station, which is perfectly suitable for leaded as well as lead-free soldering. Thanks to the ceramic heating element, temperatures in the range of 180 - 480 °C can be achieved with a short heat-up time, while the built-in microprocessor ensures particularly good temperature stabilization. In addition, the soldering station is optionally password-protected to prevent unwanted changes to the temperature settings. The large HD LED dual display shows both the set and the current temperature at the soldering tip, and you can easily switch the display between °C and °F. The high quality 900M-T-K soldering tip has a long service life and can be quickly and easily

27161500 Felder desoldering braid, 1.5 mm Description: Felder desoldering braid is an extremely absorbent copper stranded wire soaked with halogen-free no-clean flux in convenient plastic reel for desoldering SMD and THT components and removing excess solder on printed circuits.  27161500 Felder desoldering braid, 1.5mm Features: Width: 1.5mm Length: 1.6m Copper Soaked with halogen-free no-clean flux Lead-free In practical plastic roll Quality "made in Ger

Zhongdi ZD-507 Soldering Gun FeaturesVoltage: 220-240VPower: 100WFast heating timeWith trigger buttonWith LED work light for working in dark environmentZD-507 soldering gun complies with all EU safety standards.Note to users: Please always turn the trigger button on for 12s and then off for 48s to avoid overheating. 

Zhongdi ZD-912 replacement display with PCB (printed circuit board) for heat gun:Suitable for the Zhongdi ZD-912 station. With integrated control board for the heat gun. Notice: This replacement display may only be used for the display above the heat gun channel, as it contains the control board for the heat gun. 

Zhongdi ZD-912 replacement display with PCB (printed circuit board) for soldering iron:Suitable for the Zhongdi ZD-912 station. With integrated control board for the heat gun. Notice: This replacement display may only be used for the display above the soldering iron channel, as it contains the control board for soldering iron. 

Zhongdi ZD-8915 replacement display with PCB (printed circuit board):Suitable for the Zhongdi ZD-8915 desoldering station. With integrated control board. Notice: This replacement display may only be used for the ZD-8915 desoldering station of the brand Zhongdi. 

 
ZD-8907 Hot Air Iron Description
The ZD-8907 desoldering iron is the perfect tool for a variety of applications where a concentrated hot air stream is required. With its 300W power, a temperature range between 200°C - 500°C, and an air flow of up to 22l/min, it can quickly and easily remove sensitive components as well as be used with heat-shrink tubes. The desodlering iron will heat up quickly, reaching 200 °C within 25 seconds. In addition, the built-in LCD display lets you monitor the temperature so you can achieve optimal results every time. Plus, the included metal stand comes in handy for placing the hot device, ensuring work place safety. Whether you're a professional or a do-it-yourselfer, the ZD-89

ZD-8908 Hot Air Station DescriptionThe ZD-8908 digital hot air station is perfect for easy assembly and desoldering of SMD components using the hot air process, and can also be used as a hot air blower for shrinking heat-shrink tubes. With 300W power, it can heat up to 400 °C within 60 seconds. The temperature can easily be adjusted with two buttons between +100 °C to +500 °C, making it applicable for various tasks. Its closed-loop sensors and microcontroller ensure correct and stable temperature and the air volume can be controlled with the rotary control up to 120 l/min. The large display with temperature indication makes it easy to keep an eye on things while working and the side-mounted holder gurantees safe storage of the hot air nozzle. If the

 
ZD-985 Desoldering Station Description
The ZD-985 desoldering station stands out due to its compact dimensions and high performance. The set temperature at the heating element can be adjusted in 1° steps from 160°C to 480°C (or 320°F - 896°F). On the approx. 30x60mm large display, the set target temperature and the current actual temperature as well as the operating status of the heater are shown simultaneously (here it is possible to switch between °C and °F). If the heater is not used for a period of approx. 10 minutes, the set temperature is automatically reduced to 200°C. Reheating is very fast, e.g. from 200°C to 380°C in only approx. 45 seconds.