Home
Subcategories
There are 8725 products.
SUPERIOR Simple 4 RF Remote Control For Gates (SUPRF002)
€4.60 vat included 21%
SUPERIOR Simple 2 RF Remote Control For Gates (SUPRF001)
€4.56 vat included 21%
SUPERIOR 1in1 Slim Programmable Remote Control (SUPTPB007)
€4.48 vat included 21%
SUPERIOR 1in1 Classic Programmable Remote Control (SUPTPB001)
€4.73 vat included 21%
27161500 Felder desoldering braid, 1.5 mm, 1.6 m, flux soaked, copper
Felder desoldering braid is an extremely absorbent copper stranded wire soaked with halogen-free no-clean flux in convenient plastic reel for desoldering SMD and THT components and removing excess solder on printed circuits.
27161500 Felder desoldering braid, 1.5mm Features:
Width: 1.5mm
Length: 1.6m
Copper
Soaked with halogen-free no-clean flux
Lead-free
In practical plastic roll
Quality "made in Ger
€2.19 vat included 21%
5552941020 Felder solder wire, lead-free, Sn100Ni+, 1 mm, 250g, roll
€9.88 vat included 21%
52761020 Felder solder wire, lead-free, SAC (Sn96,5Ag3,0Cu0,5), 1 mm, 250g, roll
€30.93 vat included 21%
52760520 Felder solder wire, lead-free, SAC (Sn96,5Ag3,0Cu0,5), 0.5 mm, 250g, roll
High quality lead-free solder wire for hand and automatic soldering in electrical engineering, electromechanics and electronics. The flux is characterized by high temperature resistance and does not splash during melting. Optimum wetting as well as spreading values exceeding standards make this lead-free solder wire a top product among tubular solders. The new flux formulation "Clear" is based on synthetic resins (free of rosin) and has been perfectly adapted to the new needs of lead-free soldering technology:
high wetting speed and spreading on all surfaces commonly used in electro
€44.08 vat included 21%
20961020 Felder solder wire, no-clean, lead-free, Sn96Ag4, 1 mm, 250g, roll
€32.82 vat included 21%
20960520 Felder solder wire, no-clean, lead-free, Sn96Ag4, 0.5 mm, 250g, roll
Low-residue, halogen-free no-clean solder wire. Specially adapted to the requirements of lead-free electronics manufacturing. The flux is characterized by high temperature resistance and does not spatter during melting. The bright, solid flux residues are neither corrosive nor electrically conductive and can therefore remain on the solder joint. FELDER - ISO - Core® "EL" - LEAD-FREE has been tested and approved by the certification body CT MM6 of Siemens AG in Berlin for electrical conductivity and electrolytic corrosion effect (dendrite growth). The produced solderings are permanent temperature resistant up to 150°C. Low temperature resistance up to min. -96°C
€38.60 vat included 21%
ZD-156F ESD tweezer, 120x9mm, high precision
€1.19 vat included 21%
ZD-156E ESD tweezer, 115x9mm, high precision
€1.09 vat included 21%