Accueil

MEAN WELL LPF-90 LED Driver Series Features:   independent operating unit constant current universal input plastic housing IP67 overload protection by current limiting, auto recovery protected against short circuit, overload, overvoltage built-in PFC circuit
for LED and lighting applicati

MEAN WELL ELG-100 LED Driver Series Description:
ELG-100 series consists of 100W AC/DC LED drivers featuring a dual mode constant voltage and constant current output. The ELG-100 series operates at 100~360VAC input voltage and offers models with different rated output voltage ranging between 24V and 54V. The models offer high efficiency up to 91% and can operate at a temperature range of -40°C ~ +90°C thanks to fanless cooling through free air convection. Due to its metal housing and IP67/65 ingress protection level, the series is suitable for both indoor and outdoor applications.
MEAN WELL ELG-100 LED Driver Series Features:
Constant current and constant voltage
Independen

MEAN WELL MSP-450 Medical Power Supply Series Featuresclosed design (case) with fan, screw terminalsuniversal inputoverload protection by current limiting, auto recoveryprotected against short circuit, overload, overvoltagebuilt-in PFC circuitlow no-load power when using remote signalswitching on and off of output voltage via remote signalsensor connection for correct voltage at loadDC-OK signalinternal auxiliary voltage, stand-by 5V/0.3Acomplies with EN60601-1 (MOOP level)N

TIC246M

PKI 10 A rot / red (930103101)
Pole terminal with claw edge and captive insulated head and insulated ring. 4 mm diameter nickel-plated brass threaded bolt with 2 mm diameter transverse hole. For insulated, non-rotating installation in equipment chassis and switchpanels with a wall thickness up to 2 mm.
 




Technical data

 


connection
M4 thread


rated voltage
30 VAC / 60 VDC


measurement cat. acc. to IEC 61010
O (2)


rated current(consider derating curve)
35 A


material socket
brass, nickel plated


housing material
PA


temperature range acc. To IEC61010(1)
-25 °C to +100 °C


inflammability class acc. to UL 94(only valid for basic material of housing)
V-2

ZD-11M-1 Helping Hand Set Description
The ZD-11M-1 set is an ideal helper when it comes to working with a soldering iron. With its 4 fully movable arms and rubberized alligator clips, it can reliably hold a wide variety of components in place. The four additional integrated stations for soldering grease, solder, cleaning sponge and soldering tip cleaner offer convenience and prevent constant reaching around. The stand is made of heavy gauge steel and equipped with rubber pads to prevent the helping hand from slipping.
The ZD-11M-1 complies with all EU safety standards.
 
ZD-11M-1 Helping Hand Set Features

4 fully articulated arms with rubberized alligator clips
Cleaning sponge 30 x 50mm
Soldering grease 15g
Metal wool soldering tip cleane

Meanwell ELP-75 Open Frame Switching Power Supply Series Description:The ELP-75 Series switching power supplies are made with an open-frame design and pin header connections for nylon crimp connectors, making them ideal for a variety of applications. They have an universal input and a built-in PFC circuit. To prevent damage, they are also protected against overload by shutdown (auto recovery) and short circuit.Meanwell ELP-75 Open Frame Switching Power Supply Series Features: Open design (open-frame)Pin header connections for nylon crimp connectorsUniversal inputOverload protection through shutdown, auto recoveryProtected against short circuit and overvoltageBuilt-in PFC circuitLow no-load powerNotice:The power supply is designed for installation in final equipment.For detailed technical

Fan 12V 60x25 S 39,9m_/h 27dBA

Colophony 500 g - High quality product from AG TermoPasty

DC/DC-Conv 24:15V 134mA 2W

Meanwell MFM-30 Open frame power supply Series Description:The MFM-30 Series is a line of open frame power supplies that are designed for direct PCB mounting. They are highly versatile and can be used in a variety of applications, such as portable medical devices, medical computer monitors, and mobile clinic workstations. The power supplies feature universal input, come with overload protection by shutdown and auto recovery and are also protected against short circuit, overvoltage, and overtemperature. The insulation class is II and the power consumption is low when no load is present. In terms of safety, the MFM-30 Series meets IEC 60601-1, EN 60601-1, IEC 60335-1, and EN 60335-1 standards and a EN 55011 Class B EMC standard.Meanwell

MEAN WELL LPF-90 LED Driver Series Features:   independent operating unit constant current universal input plastic housing IP67 overload protection by current limiting, auto recovery protected against short circuit, overload, overvoltage built-in PFC circuit
for LED and lighting applicati