HDR-150-24 DIN rail power supply, 150W, 24V, 6.25A, MEAN WELL

34,801 €
Aucune taxe
Quantité

MEAN WELL HDR-150 Slim DIN Rail Power Supply Series Description:

The HDR-150 series consists of economical, ultra-slim 150W DIN rail power supplies that can be installed on TS-35/7.5 or TS-35/15 DIN rails. The case of the power supplies has a width of 105mm(6SU), which allows for a space-saving installation in control cabinets. The entire series offers a AC input from 85VAC to 264VAC (277VAC in operation) and complies with BS EN/EN61000-3-2. The HDR-150 series is equipped with a plastic housing so that the user is protected from possible hazards caused by electricity. With an efficiency of up to 90.5%, the entire series can operate at an ambient temperature between -30°C and 70°C under air convection. Since the HDR-150 series has all the necessary protection features and the corresponding certificates for home automation and industrial control equipment (IEC62368-1, UL508, UL62368-1, BS EN/EN61558-2-16), it is an excellent choice as a cost-effective power supply solution for household and industrial applications.

MEAN WELL HDR-150 Slim DIN Rail Power Supply Series Features:

  • Ultra slim design with 105mm(6SU) width.
  • Universal input 85~264VAC (277VAC in operation)
  • Low no-load power <0.3W
  • Insulation class II
  • Directly mountable on DIN rail (TS-35/7.5 or 15)
  • Enclosed design, touch-protected screw terminals
  • overload protection by current limiting, auto recovery
  • Protected against short circuit, overload, overvoltage
  • LED indicator for power-on
  • Cooling by free air convection (working temperature: -30~+70°C)
  • Overvoltage protection category III

MEAN WELL HDR-150 Series Application Examples:

  • Household control system
  • Industrial control system
  • Factory automation
  • Building automation
The power supply is designed for installation in final equipment.
For detailed technical specifications, please check the data sheet in the "downloads" section.
HDR-150-24
Nouveau