NRF24L01+ (send material)
the wireless module NRF24L01+ (send material)
NRF24L01 + suffix is with "+" with "+" module of the actual distance than 24 l01 module (with no "+") of at least 10 meters far, stability factor is also very good, more than 24 l01 (with no "+"), the price is much higher.
2 mbit/s, 1 mbit/s, three optional 250 kbit/s transmission rate.
MultiCeiver hardware provides the function of the six receiver at the same time.
Slice of the link layer within the software design is more simple.
2 mbit/s that makes it possible to high-quality VoIP.
2 mbit/s 1 mbit/s three optional 250 kbit/s transmission rate.
Few peripheral component provides low cost possible.
+ / - 60 PPM crystal.
Only in the antenna matching need external inductance.
Don't need to multilayer PCB.
The tolerance of 5 v input level.
Without external level translator.
Can facilitate improved ShockBurst and serial interface with all kinds of low-cost MCU connection.
Without MCU with SPI interface.
20 pin 4 x4mm QFN lead-free packaging very few peripheral components.
Under 2 mbit/s rate when receiving the peak current of 12.5 mA
@ 0 DBM under 2 mbit/s rate of the output of the peak current 11 ma
The rate of 2 mbit/s just a small average current
The power consumption of 400 na power lost mode
The power consumption of 32 ua standby mode
130 us quickly switch and wake time
With on-chip voltage regulator oltage regulators
Can work at 1.9 to 3.6 V low voltage Most likely to reduce noise
Mouse and keyboard, wireless headset, intelligent sports equipment, remote control, voice applications, safety devices, toys, VOIP applications