LC Intelligent pump controller LCPC_II

LC Intelligent pump controller LCPC_II

1.Brief Introduction of controller.

LC Intelligent pump controller is research and development by SHENZHEN LC TECHNOLOGY  CO.,LTD.It can show the LOGO individuation,include three control modes :normal,time and pressure,control start and stop of water pump accurately.

2.Controller starting up show company LOGO, enter the main interface.

3. Controller include three control modes.

1 Normal mode:

Boot the default display normal mode.Start-up pressure is 1.0 BAR, stop the pressure of 2.5 BAR.Normal mode motor has the following features:
A. leakage protection
B. lack of protection
C. rust protection: motor run automatically every 72 hours for 5 seconds.
D. power saving mode: motor running LCD intelligent close in ten minutes, press any key to recovery.

2 time mode:

When the equipment is set to the time mode control, water flow sensor and pressure sensor will not work. Motor start to suspend. When the countdown to zero, that is, to reach the set point in time, the motor stops running.

3 Pressure mode:

When the equipment is set to pressure mode control, motor start-up suspended.
A. the current pressure is less than the start-up pressure, motor running.
B. the current pressure is greater than the stop, stop running motor.
Note: leakage protection function open pressure mode.

 Controller during normal operation, can switch between three modes.