FTDI FT232RL Basic
search
  • FTDI FT232RL Basic

FTDI FT232RL Basic

€ 7,200
Geen btw
Aantal

FTDI FT232RL Basic (w/Female and Male Pins)

This is the newest revision of our FTDI Basic.

We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.

The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target.

This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working.

This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!). Our Arduino Pro boards and LilyPads use this type of connector.

One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V.

 Driver on request

There are both female and male pins are solder out, doesn’t matter what you solder on your arduino pro mini, this is all gong work out for it.
Default 5V version

 


FTDI FT232RL Basic (w/Female and Male Pins)

Il s'agit de la version la plus récente du notre FTDI Basic . C'est  un port USB SMD à 6 broches qui est soudé sur le fond, ce qui le rend plus petit et plus compact . Les fonctionnalités sont est restées les mêmse .

Cette plaquette contient l'iC FTDI FT232RL  USB vers série . Le brochage de cette carte correspond au câble FTDI qui permet de travailler avec l' Arduino officiel et Ardino clones 5V . Il peut également être utilisé pour des applications générales avec port série . La différence majeure avec cette plaquette est qu'elle apporte la broche DTR par opposition à la broche RTS du câble FTDI . La broche DTR permet à une cible Arduino la réinitialisation automatique si un nouveau sketch est téléchargé . C'est une caractéristique très agréable  à avoir et de pouvoir télécharger sans avoir à appuyer sur le bouton de réinitialisation . Ce plaquette auto-réinitialisera toute platine Arduino qui a la broche de réinitialisation vers un connecteur à 6 broches .

Les broches étiquetées BLK et GRN correspondent aux fils de couleur sur le câble FTDI . Le fil noir du câble FTDI est GND , le vert est CTS . Utilisez ces broches BLK et GRN pour aligner la platine de FTDI avec votre cible Arduino .

Cette plaquette dispose de LED TX et RX qui est plus pratique utiliser que  le câble FTDI . Vous pouvez voir le trafic série sur les voyants permettant de vérifier si la carte fonctionne.

Cette carte a été conçue pour réduire le coût de développement Arduino et augmenter la facilité d'utilisation ( les longs rochers auto- reset !) . Les plaques Arduino Pro et LilyPads utilisent ce type de connecteur .

Une des fonctionnalités intéressantes de cette plaquette est un cavalier sur le dos de la carte qui lui permet  d' être configuré pour 3,3 V ou 5 V (tension de sortie et niveau IO ) . Cette plaquette  est par défaut  à 5V , mais vous pouvez couper la trace par défaut et ajouter un cavalier de soudure si vous avez besoin pour passer à 3,3 .
Driver  sur demande .

Remarque:

    Il ya des broches mâles et femelles qui sont présentes, de sorte que vous pouvez choisir ce que vous  soudez sur votre Arduino Pro Mini .
    La version par défaut de 5V