ZD-985 desoldering station, digital, professional, 80W
95.810€
No tax
ZD-985 Desoldering Station Description
The ZD-985 desoldering station stands out due to its compact dimensions and high performance. The set temperature at the heating element can be adjusted in 1° steps from 160°C to 480°C (or 320°F - 896°F). On the approx. 30x60mm large display, the set target temperature and the current actual temperature as well as the operating status of the heater are shown simultaneously (here it is possible to switch between °C and °F). If the heater is not used for a period of approx. 10 minutes, the set temperature is automatically reduced to 200°C. Reheating is very fast, e.g. from 200°C to 380°C in only approx. 45 seconds. Due to the fine temperature control, the desoldering unit can be used for desoldering components soldered with lead-free solders.In addition to the power cable, the package includes three different nozzles (one of them already mounted) with 0.8mm, 1.0mm and 1.3 mm hole diameters, one nozzle needle each matching the diameter (for cleaning the desoldering nozzles) as well as three spare filters for the desoldering gun and one spare filter for the basic device.
The ZD-985 complies with all EU safety standards.
ZD-985 Desoldering Station Features
- Designed for lead free desoldering
- 80W power, ca. 120W peak power when heating up
- 160°C - 480°C temperature range
- PTC ceramic heating element quickly heats up the desoldering gun
- Device is automatically controlled by the integrated micro-processor
- Digital control electronics and high quality sensor
- Precise temperature control and evenly distributed heat
- Switchable temperature display from °C to °F
- Comes with power cable, three different nozzles with 0.8mm, 1.0mm and 1.3 mm hole diameters, one nozzle needle each matching the diameter (for cleaning the desoldering nozzles) as well as three spare filters for the desoldering gun and one spare filter for the basic device.