Boost DC-DC Converter Power Supply
  • Boost DC-DC Converter Power Supply

Boost DC-DC Converter Power Supply

No tax

Product Description

Common used for on-vehicle usage, portable battery, laptop power adapter.

Boost module 600W high power, wide voltage input: the 10V ->  60V, Output adjustable 12V -> 80V wide voltage; adjustable output current; ultra-low dropout.

Detailed parameters:

  • Input voltage: 10V-60V
  • Input Current: Maximum input current 15A
  • Output voltage: 12V-80V continuously adjustable
  • Output current: maximum output current of 10A (adjustable)
  • Output power: effective power P = input voltage V x 10A
  • Conversion efficiency: up to 95% (input voltage and current; conversion efficiency of the output voltage, current impact)
  • Short-circuit protection: fuse
  • Installation size: 73 x 51mm



  • Products chronological materials
  • Custom radiator Specifications: Radiator floor thickness 5mm, tooth height 21mm, length 85mm, width 63mm
  • Module fixed above the radiator, radiator and boost board are integrated design, this is very user-friendly to allow direct use
  • Only need to use long screws to amount in your system.


  • Inductor magnetic ring use bead of 27mm Sendust, 1mm double wire wound inductors, high-quality filter capacitor, input a 1000uF63V electrolytic capacitors, and output two 470uF100V electrolytic capacitors
  • On-board power supply switch, power indicator, voltage regulation, current adjustment potentiometer so that the output is more convenient.


  • DIY an output adjustable vehicle power supply, only need 12V power input access, output voltage (14V-80V) free and continuous adjustment of the output voltage can not be lower than the input voltage.
  • Universal car laptop power supply. 12V power input connected to the output regulation voltage notebook need to work.
  • Boost charger, 12V power higher than 12V battery charging, for example, for 24V battery, and charging current can be adjusted.
  • Powered electronic equipment, as long as the voltage is adjusted to the desired voltage and current does not exceed the rated current can work properly.
  • System level power supply before, when design a project, input is 10V-18V, but system board needs about 24V of power and a great power, general DC-DC module power is too small, then the module will be your most good choice, no need to debug and work directly on the machine, easily enable high-efficiency high-power boost.

The module application example:

  • An input voltage of 12V current 4.17A, boost output voltage of 20V current 2.4A, module efficiency of 97%