STM32F103ZET6+2.4 inch TFT LED development board support Uclinux system

STM32F103ZET6+2.4 inch TFT LED development board support Uclinux system

LC_STM32_uClinux_V1 using with NAND flash chip, nor flash chip with a eeprom chip port(tacitly approve non-welding),it also can use as general  development board or Uclinux System Board,we offer the Adobe Photoshop HDRI Tutorials,make you study convenience.

LC_STM32_uClinux_V onboard resource as below:

1.8M crystal oscillator as the clock of MCU.32.768KHZ crystal oscillator use for RTC.

2.64M*8 Bits NAND Flash Memory

3.128M Bits NOR Flash memory

4.512K*16 bit SRAM

5.4 user LED with a power supply LED

6.1 SR with 8 user key

7.)1 serial port

8.standard 2.54mm   separation distance JTAG socket

9.3 ways to power supply: USBMINI port,5V power DC,3.3V prot

10.2.4inch TFT 320*240 color LCD touch screen

11.1 of adjustable resistor link development board(PC4)

12.1 battery holder

13.all IO hole draw forth

14. development board size: 90.8mm*90.5mm

15.TFT size:75mm*55mm

Annotation Notes:

1.   LCD
2. battery holder（CR1220）
3.   JTAG download port (20 pins)
4. MICRO usb port
5. adjustable resistor
6. DC  Power IEC Socket
7. NAND and M29W128 Select  terminal (tacitly approve select M29W128)
8. serial port
9. M29w128 write protected  terminal(tacitly approvepull up)
10. BOOT choose
11. USB+disconnect select
12. UserRESET
13. User Led
14. RESET