Arduino-Compatible Pro Mini

3,80 €




Emballages appropriés


Echange sous garantie

Arduino-Compatible Pro Mini

The minimal design approach to EDArduino, and fully compatible with arduino. This is a 5V EDArduino running the 16MHz bootloader (select ‘Arduino Duemilanove w/ 328′ within the Arduino software). EDArduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time EDArduino users start with the Duemilanove. It’s a great board that will get you up and running quickly. The EDArduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board.

We really wanted to minimize the cost of an EDArduino. The EDArduino Pro Mini is like the EDArduino Mini (same pin out) but to keep the cost low, we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The EDArduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work.

Note: A portion of this sale is given back to EDArduino LLC to help fund continued development of new tools and new IDE features.


  • ATmega328 (Default) running at 16MHz with external resonator (0.5% tolerance)
  • USB connection off board
  • Supports auto-reset
  • 5V regulator
  • Max 150mA output
  • Over current protected
  • Reverse polarity protected
  • DC input 5V up to 12V
  • On board Power and Status LEDs